Select products now available in our online store for North American customers.

SVTR2800D DC-DC Converter

VPT’s SV Series of DC-DC converters are mission proven in systems launching for LEO, MEO, GEO, and deep space missions. These off-the-shelf units help you get your system off the ground fast. View VPT’s space program heritage.

Combine our extensive family of DC-DC converters for space with VPT’s point of load converters for space to create a light weight, extremely efficient, space-ready power system.

Packing 40W in a miniature, lightweight case, the SVTR DC-DC converter operates at full power throughout the extreme temperature range of -55°C to +125°C.

 

Features:

  • Dual outputs of ±5V, ±8V, ±12V, and ±15V
  • Up to 40W output power
  • Fault tolerant design with radiation immune magnetic isolation technology – no optoisolators
  • Extra-wide 15V to 50V input range per MIL-STD-704, transients to 80V for 1 sec
  • Extremely low profile (.405 inches) and light weight (49/52g) fully hermetic packaging
  • Wide case temperature operation of -55° C to +125° C with full performance over temperature range
  • Flanged and non-flanged case styles available
  • Fixed switching frequency

Space-Level Characterizations:

  • Characterized and guaranteed to 60krads (Si) per VPT’s RHA plan specified per MIL-PRF-38534, Appendix G, Level P with 2x margin
  • Characterized and tested for TID (total ionizing dose) at HDR (high dose rate) and LDR (low dose rate ELDRS) per VPT’s RHA plan
  • SEE characterized for no destructive events up to LET = 44 MeV/mg/cm2 including SEB, SEL, SEGR, and SEFI. No dropouts, shutdowns, latch up or burn out
  • Characterization and testing is performed at the critical semiconductor component piece-part level (RLAT) from traceable semiconductor lots
  • Characterization and testing also performed on the SVFL Series hybrid converter produced from the same traceable semiconductor lots evaluated during RLAT

Compliances and Certifications:

  • Available on DLA SMD #5962-11223
  • MIL-PRF-38534 Class H element evaluated components standard
  • VPT’s in house legacy Class KL1 available
  • MIL-STD-704 input voltage requirements
  • Manufactured in an MIL-PRF-38534 Class H and Class K, and SAE AS9100 certified manufacturing facility
  • MIL-STD-883 military and space environmental screening
  • Meets MIL-STD-461 C-G conducted emissions requirements when used with a DVMC28 EMI filter
  • VPT’s Radiation Hardness Assurance (RHA) Plan certified by DLA to MIL-PRF-38534 Appendix G

Summary Data

For complete specifications, please see the official datasheet.

To provide you with the most accurate data for the actual performance of this product once deployed, please note that the electrical performance data provided below is at Tcase = -55° C to 125° C, Vin= +28V +-5%, full load, unless otherwise specified.

Select a product to view its specifications:

ParameterConditionsSVTR2805DUnits
MinTypMax
Input VoltageContinuous
Transient(1)
152850
80
Vdc
Output VoltageFull Load, +Vo
-Vo
4.925
4.700
5.00
5.00
5.075
5.300
Vdc
Output PowerVin: 15-50V0 30W
EfficiencyVin: 28V, Full Load7379 %
Input RippleFull Load, 20Hz to 10MHz 3050mApp
Output RippleFull Load, 20Hz to 10MHz 3060mVpp
Load RegulationNo Load to Full +Vo
-Vo
 5
30
50
200
mV
Line RegulationVin: 16 to 40V +Vo
-Vo
 2
25
20
200
mV
Cross Regulation+Load 70%, -Load 30%
+Load 30%, -Load 70%
 360650mV

ParameterConditionsSVTR2808DUnits
MinTypMax
Input VoltageContinuous
Transient(1)
152850
80
Vdc
Output Voltage(2)Full Load, +Vo
-Vo
7.92
7.76
8.0
8.0
8.08
8.24
Vdc
Output Power(3)Vin: 15-50V0 30W
EfficiencyVin: 28V, Full Load7480 %
Input Ripple(4)Full Load, 20Hz to 10MHz 3050mApp
Output RippleFull Load, 20Hz to 10MHz 4060mVpp
Load Regulation(2)No Load to Full +Vo
-Vo
 5
30
50
200
mV
Line RegulationVin: 16 to 40V +Vo
-Vo
 2
35
20
200
mV
Cross Regulation(5)+Load 70%, -Load 30%
+Load 30%, -Load 70%
 450650mV

ParameterConditionsSVTR2812DUnits
MinTypMax
Input VoltageContinuous
Transient(1)
152850
80
Vdc
Output Voltage(2)Full Load, +Vo
-Vo
11.82
11.64
12.00
12.00
12.18
12.36
Vdc
Output Power(3)Vin: 15-50V0 40W
EfficiencyVin: 28V, Full Load7884 %
Input Ripple(4)Full Load, 20Hz to 10MHz 3050mApp
Output RippleFull Load, 20Hz to 10MHz 2550mVpp
Load Regulation(2)No Load to Full +Vo
-Vo
 2
20
50
200
mV
Line RegulationVin: 16 to 40V +Vo
-Vo
 2
25
20
200
mV
Cross Regulation(5)+Load 70%, -Load 30%
+Load 30%, -Load 70%
 430650mV

ParameterConditionsSVTR2815DUnits
MinTypMax
Input VoltageContinuous
Transient(1)
152850
80
Vdc
Output Voltage(2)Full Load, +Vo
-Vo
14.70
14.55
15.00
15.00
15.30
15.45
Vdc
Output Power(3)Vin: 15-50V0 40W
EfficiencyVin: 28V, Full Load7984 %
Input Ripple(4)Full Load, 20Hz to 10MHz 2550mApp
Output RippleFull Load, 20Hz to 10MHz 2550mVpp
Load Regulation(2)No Load to Full +Vo
-Vo
 2
35
50
200
mV
Line RegulationVin: 16 to 40V +Vo
-Vo
 2
65
20
200
mV
Cross Regulation(5)+Load 70%, -Load 30%
+Load 30%, -Load 70%
 420650mV

(1) Transient time up to 1 second.
Subject to all export restrictions and export regulations including but not limited to the Export Administration and Foreign Assets Control Regulations. Further restrictions may apply; contact VPT for details.
 
VPT, Inc.

Support - Conditional Pop-Up
Contact Us
Name
Name
First
Last

Maximum file size: 10MB