SVSA2800D DC-DC Converter

Bookmark and Share

Description

VPT’s SV Series of DC-DC converters are mission proven in systems launching for LEO, MEO, GEO, and deep space missions. Qualified to MIL-PRF-38534 Class K on DLA SMDs, these  off-the-shelf units help you get your system off the ground fast. View VPT’s space program heritage.

Combine our extensive family of DC-DC converters for space with VPT’s point of load converters for space to create a light weight, extremely efficient, space-ready power system.

Measuring just approximately one inch square, the SVSA DC-DC converter provides up to 6W of output power from an efficient, light weight, space-saving package.

Features

  • Dual outputs of ±5V, ±12V, and ±15V
  • Up to 6W output power
  • Fault tolerant design with radiation immune magnetic isolation technology – no optoisolators
  • Extra-wide 15V to 50V input range per MIL-STD-704, transients to 80V for 1 sec
  • Extremely low profile (.270 inches) and light weight (15g) fully hermetic packaging
  • Wide case temperature operation of -55° C to +125° C with full performance over temperature range
  • Fixed switching frequency

Space-Level Characterizations

  • Characterized and guaranteed to 30krads (Si) per VPT’s RHA plan specified per MIL-PRF-38534, Appendix G, Level P with 2x margin
  • Characterized and tested for TID (total ionizing dose) at HDR (high dose rate) and LDR (low dose rate — ELDRS) per VPT’s RHA plan
  • SEE characterized for no destructive events up to LET = 44 MeV-cm2/mg including SEB, SEL, SEGR, and SEFI. No dropouts, shutdowns, latch up or burn out. Up to 85 MeV-cm2/mg also available.
  • Characterization and testing is performed at the critical semiconductor component piece-part level (RLAT) from traceable semiconductor lots
  • Characterization and testing also performed on the SVFL Series hybrid converter produced from the same traceable semiconductor lots evaluated during RLAT

Compliances and Certifications

  • Available to MIL-PRF-38534 Class K on DLA SMD# 5962-11216
  • MIL-PRF-38534 Class H element evaluated components standard
  • MIL-STD-704 input voltage requirements
  • MIL-PRF-38534 Class H and Class K facility manufacturing
  • ISO-9001
  • MIL-STD-883 military and space environmental screening
  • Meets MIL-STD-461 C-F conducted emissions requirements when used with a DVMA28 EMI filter
  • VPT’s Radiation Hardness Assurance (RHA) Plan certified by DLA to MIL-PRF-38534 Appendix G

Summary Data

For complete specifications, please see the official datasheet.

To provide you with the most accurate data for the actual performance of this product once deployed, please note that the electrical performance data provided below is at Tcase = -55° C to 125° C, Vin= +28V ±5%, full load, unless otherwise specified.

ParameterConditionsSVSA2805DSVSA2812DSVSA2815DUnits
MinTypMaxMinTypMaxMinTypMax
Input VoltageContinuous
Transient(1)
152850
80
152850
80
152850
80
Vdc
Output Voltage (2)Full Load
+Vo
-Vo
4.925
4.75
5.00
5.00
5.075
5.25
11.82
11.52
12.00
12.00
12.18
12.48
14.775
14.40
15.00
15.00
15.225
15.60
Vdc
Output Power (3)Vin: 15-50V0 50 60 6W
EfficiencyVin: 28V, Full Load6671 7277 7379 %
Input Ripple (4)Full Load, 20Hz to 10 MHz 3050 3050 3050mApp
Output RippleFull Load, 20Hz to 10MHz 3050 3050 3050mVpp
Load Regulation (2)No Load to Full, +Vo
-Vo
 5
45
50
200
 2
40
50
200
 2
40
50
200
mV
Line RegulationVin: 16-40V, +Vo
-Vo
 2
10
20
200
 2
10
20
200
 2
10
20
200
mV
Cross Regulation+Load 70%, -Load 30%
+Load 30%, -Load 70%
 220450 220450 220450mV

Subject to all export restrictions and export regulations including but not limited to the Export Administration and Foreign Assets Control Regulations. Further restrictions may apply; contact VPT for details.



Top